Changzhou Joyruns Steel Tube CO.,LTD
High quality, Best service, Reasonable price.
Add to Cart
Aluminum coil Tube 3003 3102 for Air Conditioner/Aluminum Pipe for refrigeration part
Aluminum tubes are especially suited to long production runs for industrial applications. Mainly be used on the air-conditioner, freezer, refrigeration, Condenser, intercooler, evaporator, warm wind movement, air conditioner pipeline, car radiator, etc.
ASTM B241 Gr 1060 Aluminum, is a low alloy strength with good corrosion resistance. It is widely used to manufacture chemical equipment, railroad tank cars. Aluminum tubes are especially suited to long production runs for industrial applications. Mainly be used on the air-conditioner, freezer, refrigeration, Condenser, intercooler, evaporator, warm wind movement, air conditioner pipeline, car radiator, etc
Aluminum tube for the HVAC&R industry. the surface of the coiled tube is smooth, no pores, no wear, and nitrogen is maintained. aluminum tubes are especially suited to long production runs for industrial applications. Mainly be used on the air-conditioner, freezer, refrigeration, Condenser, intercooler, evaporator, warm wind movement, air conditioner pipeline, car radiator, etc.
Our refrigeration condenser aluminum pipe is widely used for the refrigeration and air condition industry.
Like evaporator, air conditioner, condenser, heat exchanger, freezer, oven gas, boiler and so on.
| A1050 Aluminium Chemical Composition | |||||||||
| Al | Si | Cu | Mg | Zn | Mn | Ti | V | Fe | Others |
| 99.5~100 | 0~0.25 | 0~0.05 | 0~0.05 | 0~0.05 | 0~0.05 | 0~0.03 | 0~0.05 | 0~0.40 | 0~0.03 |
| A1060 Aluminium Chemical Composition | |||||||||
| Al | Si | Cu | Mg | Zn | Mn | Ti | V | Fe | Others |
| 99.6-100 | 0~0.25 | 0~0.05 | 0~0.03 | 0~0.05 | 0~0.03 | 0~0.03 | / | 0~0.35 | |
| A1070 Aluminium Chemical Composition | |||||||||
| Al | Si | Cu | Mg | Zn | Mn | Ti | V | Fe | Others |
| 99.7~100 | 0~0.2 | 0~0.04 | 0~0.03 | 0~0.04 | 0~0.03 | 0~0.03 | 0~0.05 | 0~0.25 | |
| Physical Property of 1050 1060 1070 aluminum tube pipe | ||||||
| Alloy | Temper | Wall thickness /mm | Room temperature Test Result | |||
| Tension Strength/MPa | Yield Strength/MPa | Elongation/% | ||||
| A50mm | A | |||||
| Not less than | ||||||
| 1050 | O,H111 | All | 60 ~ 100 | 20 | 25 | 23 |
| H112 | All | 60 | 20 | 25 | 23 | |
| F | All | － | － | － | － | |
| 1060 | O | All | 60 ~ 95 | 15 | 25 | 22 |
| H112 | All | 60 | － | 25 | 22 | |
| 1070 | O | All | 60 ~ 95 | － | 25 | 22 |
| H112 | All | 60 | 20 | 25 | 22 | |
Production Standard: ASTM B241 ASTM B241M GB etc.
| Size(inch) | O.D(mm) | W.T(mm) | Meters per coil |
| 1/4" | 6.35 | 0.8 | 15 20 30 50 |
| 5/16" | 7.94 | 0.8 | 15 20 30 50 |
| 3/8" | 9.52 | 0.8 | 15 20 30 50 |
| 1/2" | 12.7 | 0.8 | 15 20 30 50 |
| 5/8" | 15.88 | 1 | 15 20 30 50 |
| 3/4" | 19.05 | 1 | 15 20 30 50 |
Packing
